Connecting To The Network - Yamaha MusicCast ISX-80 Manual De Instrucciones

Connecting to the
network
You can play back music files stored on your PC, mobile
*
devices, DLNA -compatible NAS, or audio contents on the
Internet, by connecting this unit to the network. You can
also operate the unit with your mobile device.
* Digital Living Network Alliance
1
Start "MusicCast CONTROLLER."
2
In "MusicCast CONTROLLER," start
setting the network.
3
Follow the instruction of "MusicCast
CONTROLLER" to press and hold the
CONNECT of this unit.
• The unit will become ready to be connected to
the network and the Wi-Fi indicator (
4
Set the network by following the
indication of "MusicCast
CONTROLLER."
• When the unit is connected to the network, the
Wi-Fi indicator ( P.5) lights up.
This unit
Internet
• For network connection, "MusicCast CONTROLLER" is required. Before making connection, connect the mobile
device where "MusicCast CONTROLLER" has been installed to the wireless router (access point) you will use.
• For details on Internet connection, refer to the owner's manuals of your network devices.
• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block
the access of the unit to the network devices or the Internet. In this case, change the setting of the security software
P.5) blinks.
or network devices.
Initializing network settings
A
1
Press to turn the unit off.
2
Pull out the plug from the outlet.
3
While pressing
- After the source indicator (NET and
several seconds, the screen changes to the clock display.
Wireless router
(access point)
A
, plug the power cable into an outlet.
) flashes for
Preparations
Mobile device
PC
NAS
15
En