Menu Structure - LORCH S Pulse XT Manual De Instrucciones

Menu structure

15 Menu structure
Standard
Synergic
SpeedArc
SpeedArc XT
Pulse
TwinPulse
SpeedPulse
Mode
Speed-TwinPulse
S-Pulse XT
TwinPulse XT
SpeedUp
SpeedRoot
SpeedCold
Man. MIGMAG
Electrode
TIG
Extras
SpeedUp Wire feed corr.2
SpeedUp frequency
SpeedUp relation
SpeedArc dynamic
Set/Job (Job selection)
Second voltage +-
Second current
Spot welding time
Arc dynamic
Dynamics
Inductor effect
Inductor effect Man.
SpeedArcBasic On/Off
SpeedArcBasic dynamic
Wire feed speed corr.
S-TwinP. Arc length cn.2
Arc length correction
Gas post-flow
Wire burnback time
Crater fill time
End Arc length corr.
Cr. fill wire feed speed
Crater fill voltage +−
Crater fill voltage
Wire feed speed
Crater fill current
Downslope
Downslope (V)
Welding voltage
Welding current
Twin pulse relation
TwinPulse curr. change
TwinPulse frequency
Start current time
Start current
Start Arc length corr.
Start wire feed speed
Start welding voltage
Start welding voltage +−
Wire creep speed
Gas pre-flow
01.21
Standard programs
S 01
6
6
S 10
3
6
3
3
1:Machine data
2:Diagnosis
1
1
3:Sprache/Language
4:Display contrast
3
5:Mode cooling system
3
6:Lock function
7:Throat thickness
8:Process selection
9:Arc length control
10:Compensation
11:Robot interface
12:Torch / aux. drive
909.2599.9-06
2
1) Only available if "4-stroke 2 On" switched on.
2) It is not available or suitable for all modes.
Display "noP": Program is not available for the set
operating mode.
2
Display "Pxx": Program is available for the set
operating mode.
3) Only available as an option
5) See LorchNet Connector operating manual
6) Only available as an option for S Pulse XT
2
1:OS Master
2:OS Process
3:OS Wirefeeder
4:Welding programs
5:Operating hours counter
6:Configuration
7:Option
1:Last error messages:
2:Module temperatures °C
3:Op. voltages 15/24V
4:Flow rate cool. system
5:W.feeder motor current
6:Arc power
Language selection
Display contrast
0 = Auto
1 = On
2 = Off
3 = 30 min
Code OK
0 / 1 / 2 / 3
4.0 mm = 60 cm/min
01 TIG: on/off
02 Man.MIGMAG: on/off
03 Electrode: on/off
04 Standard: on/off
06 Synergic: on/off
07 SpeedArc: on/off
08 SpeedArcXT: on/off
09 Pulse: on/off
10 TwinPulse: on/off
11 SpeedPulse: on/off
12 S-TwinPulse: on/off
13 S-Pulse XT: on/off
14 S-TwinPulseXT: on/off
15 SpeedUp: on/off
16 SpeedRoot: on/off
17 SpeedCold: on/off
0 = Voltage
1 = Wire
Length (10)
Resistance (10)
5
0 = no Push Pull
=/* Lorch PP04W 0.8
=/* Lorch PP04W 1.0
/yes
/yes
/yes
- 55 -