Important; Before Use - Miniland chefy 6 Manual Del Usuario

ENGLISH
20. The supplied power cable should not be used on any other device and no other power cable
should be used with this food processor.
21. Unplug the appliance from the electrical power supply before cleaning it or storing it, or when you
are going to handle the blade. Do not disconnect the plug by pulling the cable.
22. Do not submerge the power cable, plug or base in water or other liquid.
23. This appliance does not contain any component that may be of use to the user. Do not dismantle it.
24. This appliance should only be used inside the home. Do not use it outside.
IMPORTANT: We inform you that any changes and modifications to the equipment not made by
the technical service of MINILAND are not covered by the product's guarantee.
4. PRODUCT FEATURES
4.1 DESCRIPTION OF THE PARTS (Figure 1)
1. Electrical unit
2. Control panel
3. Deposit
4. Lid for the deposit
5. Mains plug
6. Lid for the jug
7. Jug
8. Basket
9. Blades
10. Sterilisation base
11. Sterilisation cover
12. Set of tongs
13. Measuring jug
4.2 ON-SCREEN INFORMATION AND CONTROL PANEL (Figure 2)
A. Screen: shows the time in minutes
B. Heating/sterilisation function
C. Defrosting/temperature maintenance function
D. Food cooking function
E. Food cooking with subsequent blending function
F. Increase +
G. On/off
H. Reduce -
I. Blending function
5. USAGE INSTRUCTIONS

5.1. BEFORE USE

Before using the product, place the appliance on to a suitable flat surface, ensuring that it is out of the
reach of children, and insert the mains plug (5) into an electrical outlet.

IMPORTANT:

· Press the on/off button (G) to stop the operation during a work cycle.
· In order to reduce electricity consumption, if the device is kept in standby mode, it will switch off
automatically after 5 minutes.
· Choosing functions: once a function has been chosen, it cannot be modified. To go back and
establish a different function, switch the appliance off and on again by pressing the on/off button (G).
5.2 HEATING BOTTLES OR JARS OF BABY FOOD
This device is suitable for heating a bottle or a jar of baby food. Remember that the jars should always
be inserted with their lid removed.
1. Pour the volume of water indicated in the tables from this section into the deposit (3), depending
on the volume and temperature of the bottle or jar. Use the measuring jug (13) included to measure
the quantity of water. Hard water may increase the accumulation of residue inside the deposit (3).
We recommend using filtered water.
2. Place the sterilisation base (10) inside the deposit (3) and place the bottle inside the deposit on to
the sterilisation base (10).
3. Switch the appliance on by pressing the on/off button (G).
4. Press the heating/sterilisation (B) button. The screen (A) will show the value '5' by default, indicating
16