Technical Specifications - Miniland chefy 6 Manual Del Usuario

IMPORTANT: Do not use abrasive products, chemical solvents or sharp tools to clean the
steriliser.
6.2. REMOVING BUILD-UPS OF LIMESCALE
We recommend removing limescale build-ups from the deposit (3) every four weeks to ensure that it
continues working effectively.
1. Pour a mixture of 80ml hot water and 80ml white vinegar inside the deposit (3) and close it with
the lid for the deposit (4).
2. Switch the appliance on by pressing the on/off button (G).
3. Press the heating/sterilisation (B) button.
4. The screen (A) will show the value '5' by default and the cleaning process will begin.
5. Once the process has finished, the appliance will emit an audible warning.
6. Disconnect it from the power supply. Empty the contents of the deposit (3), rinse it several times
with plenty of water and wipe it with a damp cloth.
7. If, after this process, you see that the build-up of limescale has not been completely removed,
repeat the steps in this section.
NOTE: Instead of white vinegar, you can also use citric acid-based descalers, following the
manufacturer's instructions. Do not use any other types of descalers.

7. TECHNICAL SPECIFICATIONS

• Voltage: 220-240V CA.
• Frequency: 50 Hz.
• Heating consumption: 400W
• Blending consumption: 130W
8. INFORMATION ON DISPOSING OF THE PRODUCT
This product must be disposed of responsibly. Do not throw away products that show the
symbol of a rubbish bin crossed out together with all other household waste. Once their
useful life is over, these products must be disposed of by taking them to a collection and
treatment centre designated by the local authorities. You can also contact the establishment
where you purchased the product.
23
ENGLISH