Dash Disassembly; Kit Preparation - Metra 95-8217B Instrucciones De Instalación

Dash Disassembly

1. Unclip and remove the (2)
side panels on the left and
right side of the factory radio.
(Figure A)
2. Remove (4) 10mm screws
securing the radio. (Figure B)
Continue to Kit Preparation
(Figure B)
(Figure A)
95-8217B
1. Attach the (4) yellow panel clips to rear of radio housing where shown.
(Figure A)
Note: OEM factory clips can also be used.
Continue to Kit Assembly
REAR VIEW - RADIO HOUSING
(Figure A)
2

Kit Preparation

YELLOW CLIPS
YELLOW CLIPS