Kit Assembly - Metra 95-8217B Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the radio brackets to the radio using the
screws supplied with the radio. (Figure A)
2. Attach the radio trim panel to the bracket/radio
assembly. (Figure A)
3. Locate the factory wiring harness and antenna
connector in the dash. Metra recommends using
the proper mating adapters from Metra and/or
AXXESS. Test the radio for proper operation.
4. Secure the radio to the vehicle using the factory
hardware, and then reassemble the dash in
reverse order of disassembly.
95-8217B

Kit Assembly

(Figure A)
3