Runtal 40016512 Manual De Instrucciones página 31

ECO MODE (continued)
A) Linked Eco operation
The linked economy mode allows the temperature to be reduced by 3.5°C compared to the
desired temperature level for the COMFORT setting.
boost
mode
B) Unlinked Eco operation
You can choose to unlink the Eco mode temperature from that of the Comfort mode (see
chapter 5.5 parameter 2). You can then choose the desired room temperature when the
appliance is running in Eco mode.
boost
mode
The unlinked eco temperature must differ by at least 1° from the temperature set for Comfort
mode. (e.g.: your Eco temperature cannot be higher than 18°C if your Comfort temperature is
set at 19°C).
If you don't enter a setting, the unlinked Eco temperature will have a default value of 15.5°C.
58

boost
mode
The user cannot change this temperature set-
ting. It cannot be higher than 19°C or lower
than 7°C.
boost
mode
7 to
19°C
COMFORT MODE
(recommended if the room is occupied)
This temperature level can be adjusted from 7 to 28°C in
0.5°C steps.
The LED on the appliance is on, showing red.
PROGRAMMES P1 AND P2
(Pre-set programmes)
Your appliance's remote control includes two daily programmes, P1 and P2. These are based on
various room usage scenarios which alternate between Comfort mode and Eco mode for your
appliance, depending on the time.
The LED on the appliance will light up with the colour corresponding to the current operating
mode (see chapter 4.2).
P1 is to heat your room between 5 and 9am, then from 5 to
11pm (e.g. working day).
P2 is to heat your room between 5 and 9am, from 12 to 2pm
and then from 5 to 11pm (e.g. working day, returning home at
midday).
NOTE:
You can also set a detailed procedure of these programmes P1 and P2 yourself (see
chapter 7).
40016512 11/2017
boost
mode
Default content for
programme P1
Default content for
programme P2
59