Operation; Programing Mode; Change The Master Code - Steren SEG-150 Manual De Instrucciones

Operation

To register users or to schedule Access Control functions, you must enter a
series of keys. For example:
To deactivate the alarm relay activation must press
7 + 1 + 0 + 8 + #
This means that you must press the keys in this sequence.

Programing mode

Enter the programming mode by pressing:
0000 + * *
Note: 0000 is the preconfigured master code. ** Is to confirm that code.
To exit programming mode, press * twice.

Change the master code

- Change the master code
To change the master code, use the following sequence:
01 + 3289 + #
After introducing the sequence will hear two tones.
In this case, 01 means it will change the master code, 3289 is the new code
(can be any with 4 characters), # is used to confirm.
14