Kohler K-11830 Guia De Instalacion página 8

Ell
7. Install the Control Box
IMPORTANT! It is critical that the inlet and outlet holes be aligned
correctly. The inlet hole is round, the outlet hole is hex shaped.
There is a sticker on the inlet side identifying it.
Slide the escutcheon over the elbow and attach the elbow to the
ell.
Slide the escutcheon tight against the wall.
Attach one end of the hose to the elbow and attach the other end
of the hose to the control box outlet.
Attach the supply hose to the control box inlet.
Attach the other end of the line to the supply stop or thermostatic
valve (recommended).
1080064-2-A
Outlet
Inlet
Round Hole
8
Hex Hole
Outlet
Inlet
Kohler Co.