Complete The Installation - Kohler K-11830 Guia De Instalacion

Green and Red
Solenoid Wires

8. Complete the Installation

NOTE: Avoid the area in front of the sensor for two minutes after
connections are complete. Sensor will not function correctly if it is
triggered in the first two minutes. Disconnect and reconnect the
power to reset the sensor.
Connect the solenoid wires (green and red).
Connect the battery wires (black and orange).
Avoid the area in front of the sensor for two minutes.
Install the faucet trim following the directions provided.
Turn the water on.
Test the faucet.
Check for leaks.
Kohler Co.
Orange and
Black Battery
Wires
9 1080064-2-A