Adjust The Center Door Panel; Install The Backstop - Kohler K-1025-H2 Guia De Instalacion

Center Door Panel

22. Adjust the Center Door Panel

Confirm the center door panel hangs parallel with both side door assemblies.
Confirm the bottom deflector just makes contact with the acrylic surface of the footbath.
Loosen one or both roller nuts, and adjust the center door panel by turning the cam roller with the
wrench to obtain proper fit.
Use both nut wrenches to carefully turn each roller nut until the locking pellet feature is tightened
securely.

23. Install the Backstop

Choose a backstop and cover that matches the color of the door frame.
Insert the well nut into the pre-drilled hole in the center of the footbath curb.
Attach the backstop to the footbath curb by securely threading a #10 x 1" panhead screw into the
well nut. Do not overtighten.
Apply silicone sealant to the backstop cap, then press it onto the backstop.
Kohler Co.
Bottom Deflector
#10 x 1" Panhead Screw
Backstop
Cap
21
Backstop
Well Nut
Apply
Sealant.
Curb
1032110-2-E