Kohler STERLING 4700 Serie Guía De Instalación Y Cuidado página 7

Measure
here.
Important:
2. Measure and Cut the Bottom Track
CAUTION: Risk of personal injury. Always wear safety glasses when cutting materials.
Measure from the wall to the transition jamb at the flattest part of the shower ledge (dimension
"D").
Mark dimension "D" on the bottom track.
IMPORTANT! For best results, use a 32 teeth per inch hacksaw blade and a miter box to cut the bottom
track.
Subtract 7/8" (2.2 cm) from dimension "D" and cut the bottom track to this dimension.
File the rough edges smooth where the bottom track was cut, taking care not to mar the finished
surface.
NOTE: If there are curves where the sidewalls meet the threshold, use a file to contour the bottom track
edges to match the curves.
Sterling
Curved Base
Angled Base
Measure carefully. If your walls are curved or
angled, measure above the curve or angle. Failure
to do so can result in an improperly cut bottom
track and can void the warranty.
Top View
D
Front View
7 1054388-2-D