Publicidad
Idiomas disponibles
Idiomas disponibles
To Tow:
1.
Align trailer and tow vehicle in a straight line on a level surface.
2.
Pull grab handle out and rotate clock wise to place latch pins in front holes.
3.
Set trailer brakes and slowly drive tow vehicle rearward until the Husky HD
Roller stops with the latch pins in the front locked position. Both the grab
handle and locking bar latch pins should be engaged in both front most
holes to completely lock the Husky HD Roller in place.
4.
Visually inspect the pins to be sure they are engaged in both front locking
holes (See pg. 11). Set the trailer brakes and move the tow vehicle forward
slightly to be sure both latching pins are fully engaged. You are now ready
to tow.
Front of Tow Vehicle
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support / Product Updates.
2020 Keystone Automotive Operations Inc. All Rights Reserved. 12/07/2020-Rev3
Husky HD Roller and hitch in driving
position.
Page-14
Publicidad
