Publicidad
Idiomas disponibles
Idiomas disponibles
Compress the Spring slightly, and place it, and the 7/8" Washer, between
8.
the Coupler Bar and Driver's Side Roller as shown.
9.
Align the Spring and Washer over the hole in the Roller and the Coupler
Lock Bar.
Apply grease here
10. Apply Grease to the Lock Handle where shown.
Place the handle in the Top hole of the Driver's
Side roller and rotate the Handle to align the
lock pin with the Towing Position hole. Push in
the Handle completely into the Roller Housing
Assembly.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support / Product Updates.
2020 Keystone Automotive Operations Inc. All Rights Reserved. 12/07/2020-Rev3
Lock Handle
Page-8
Publicidad
