Pre-Operation Checklist - Allmand MAXI-LITE Manual Del Operario

3
Ref Description
A Engine Panel
B Light Panel
C Auxiliary Outlet Panel

Pre-Operation Checklist

Perform the following checks before transporting and
operating the unit, as well as when performing general
maintenance.
WARNING
Unsafe Operation Hazard
• Operating or transporting the machine with worn,
damaged or missing parts can result in death or serious
injury. Always replace worn, damaged or missing parts
promptly. Do not transport or operate the machine
until all worn, damaged or missing parts have been
replaced, and proper operation of the machine has
been verified.
Note:
We encourage the use of authorized replacement Allmand
parts. The warranty does not cover damage or performance
problems caused by the use of parts that are not authorized
replacement parts.
1. Check that all safety and operation decals are present
and legible. See Safety - Safety Decals.
2. Check that all operator's manuals (product, engine,
generator, etc.) are with the unit.
3. Check the following components for wear and damage,
and for proper operation:
a. Tongue jack
• Check for rust or damage. Repair or replace as
needed.
• Check for proper operation.
See Transporting - Using The Tongue Jack.
b. Hitch Assembly (trailer coupler / lunette ring)
• Check for rust or damage. Repair or replace as
needed.
• Check for proper operation.
See Transporting - Coupling And Uncoupling
The Trailer Hitch.
• Check hardware for proper tightness. Tighten as
needed.
c. Safety chains
• Check for rust or damage. Repair or replace as
needed.
• Check hardware for proper tightness. Tighten as
needed.
d. Trailer lighting cable
• Check for cut, frayed or bare wires. Repair or
replace as needed.
• Check connector for damage. Repair or replace
as needed.
e. Breakaway kit
• Check for broken or frayed wires or breakaway
cable.
• Check battery charge status.
f. Tires
• Check for wear, cuts, cracks, etc. Replace as
needed.
• Check and adjust inflation pressure.
See Specifications for proper inflation pressure.
g. Brakes
• Check brakes for proper operation and wear.
Repair as needed.
h. Axle and undercarriage
• Check for rust or damage. Repair as needed.
i. Outriggers and stabilizer jacks
• Check for rust or damage. Repair or replace as
needed.
• Check for proper operation.
See Operation - Using The Outriggers &
Stabilizer Jacks.
j. Electrical wiring
• Check for cut, worn or bare electrical wiring.
Repair as needed.
9