Promax DT-800 Manual De Usuario página 66

- Editing text field
In case you have to EDIT the text, follow these steps:
1.- Press ENTER
2.- To the right of the edit text appears one letter and one number. The
number indicates the position of the character is changing. The letter
beside the number indicates the type of character that is being used
( "A" for capital letters, "a" for lowercase letters, "@" for symbols and "1"
for numbers).
3.- To move between characters press the RIGHT
delete a character do a long press (1 s) by pressing RIGHT
LEFT
4.- To change a character press the UP
type of character (uppercase and lowercase letters, symbols or
numbers) make a long press (1 s) with the UP
key.
5.- When you are finished editing press ENTER
and exit the menu.
WARNING!
To VALIDATE a value after changing it you must press ENTER
you press ESCAPE
For the changes were applied, you must SAVE previously the settings. There are
two different ways to save the settings made:
On one hand you can save your settings using the SAVE option on each module.
On the other hand you can save the settings of all modules at once using the
SAVE ALL option, which is on the DT-800 menu.
Page 20
to enter the menu item.
.
the value will not be accepted.
CONTROL MODULE. DT-800
or LEFT
or DOWN . To vary the
or DOWN
to validate the text
or UP
. To
or
. If
04-2012