Promax DT-800 Manual De Usuario página 69

CONTROL MODULE. DT-800
4.7.4.2 Configuration options DT-800.
The options of the menu CONFIGURATION at the module of control DT-800 are:
- Manual Assigment.
If the Auto assigment done automatically by the system when starting does
not match the actual location of the modules in the rack, this option allows you
to change this assigment manually.
1.- Press ENTER
arrows you can see the correspondence between the current
location assigned (second line) and the modules (third line).
2.- Press ENTER
next to it) and you can move the third one, which is the name of the
modules, using LEFT
3.- Make assigment manually, one by one and press ENTER
04-2012
to get into the menu. With RIGHT
DT-800
MANUAL ASSIGNMENT
SLOT5 MODULE-1:
EMPTY
MODULES FOUND: 8
Figure 16.- Manual assignment.
again. The second line is selected (it shows an arrow
and RIGHT
DT-800
MANUAL ASSIGNMENT
SLOT-5 MODULE-1:
DT-302
MODULES FOUND: 8
Figure 17.- Change of placement module.
and LEFT
1/7
arrows.
1/7
.
Page 23