Din Radio Provision With Pocket - Metra INST-581FD Instrucciones De Instalación

1. (a) For the Ford Edge/Expedition
2007, Explorer 2006-2007, Fusion
2006-2007, Mustang 2007 and
the Super Duty 2008 attach the
included spacers to the back of the
radio housing mounting tabs.
(Figure A)
Note: Use the screws supplied with
this kit to mount the radio housing in
the vehicles that require the spacers.
(Figure A)
Kit Assembly INST-581FD

DIN radio provision with pocket

(b) For the Ford Freestar 2004-
2007, Monterey 2004-2007, Focus
2005-2007, and the F-Series Super
Duty 2005-2007, slide the included
brackets onto the sides of the radio
housings pocket from the back of the
housing forward. (Figure B)
If your vehicle is not listed above
move to Step 2.
(Figure B)
2. Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure C)
3. Slide the aftermarket radio into the
cage until it snaps in place.
(Figure D)
4. Locate the factory wiring harness in
the dash. Metra recommends using
(Figure C)
11
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
5. Reassemble dash in reverse order
of disassembly.
(Figure D)