Double Din Radio Provision - Metra INST-581FD Instrucciones De Instalación

1. For the 2007 Ford Edge/
Expedition, 2006-2007 Explorer/
Fusion/Mercury Milan, 2004-
2007 F-150, 2005-2007 Five
Hundred/Freestyle/Mustang/
Mercury Montego, 2005-2007
Lincoln Mark LT and the 2008
Super Duty, cut and remove the
rear mounting tabs from the Double
DIN Brackets.
If your vehicle is not listed above
move to Step 2.
(Figure A)
Kit Assembly INST-581FD

Double DIN radio provision

2. For the 2007 Ford Edge/
Expedition, 2006-2007 Explorer,
2006-2007 Fusion, 2007
Mustang and the 2008 Super
Duty attach the included spacers
to the back of the radio housing
mounting tabs. (Figure A)
If your vehicle is not listed above
move to Step 3.
(Figure B)
3. Attach the double DIN brackets to the
radio housing. (Figure B and C)
Note: The notch in the housing
should be on top.
4. Slide the Double DIN radio into the
radio housing/bracket assembly and
secure the radio to the assembly
using the screws supplied with the
radio. (Figure D)
(Figure C)
9
5. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
6. Reassemble dash in reverse order
of disassembly.
(Figure D)