Tips For Correct Application - Be Cool BC9ACHL2001F Manual De Instrucciones

The resulting atoms and molecules promote the chemical degradation process and can be
COOL-MODE
 Use the COOL-Button to start or end the function  the respective LED indicator will
light up.
 Make sure the water level is above the MIN.
 As soon as you press the button, the device starts pumping water against the water
filter to generate cold and moist air, which is then blown out of the device.
If the AirCooler is in the highest fan level and you activate the COOL-Mode, the device will
automatically switch tot he lowest speed level for approx. 30 seconds, before it automatically
HEAT-MODE
 Press the HEAT-Button to activate or deactivate the function  the respective LED-
indicator lights up.
 During the HEAT-Mode, the blower level will automatically set to the lowest level.
 As soon as you switch off the HEATING-Mode, the fan remains in operation for approx.
one minute for the purpose of dissipating heat.
If the air in the HEAT-Mode is too dry, you can use the COOL-Button to increase the

TIPS FOR CORRECT APPLICATION

Below are some tips to get the very best out of the air cooler:
During the COOL-Mode protect the room from direct sunlight with
curtains, blinds or shutters. This saves you energy.
Do not place any objects on to the appliance, and do not obscure the air outlet.
Keep the grilles clear.
During the COOL-Mode make sure that no heat sources are operating in the room.
Never use the appliance in very humid rooms (e.g. laundry rooms).
Do not use the appliance outdoors.
Make sure that the appliance is on level flooring and that the locking brakes are applied.
NOTE
used to remove odors and disinfect the air.
NOTE
switches back to the highest speed level.
NOTE
humidity in the room.
Seite 20 von 123