•
Remove Engine Oil Fill Cap.
•
Reinstall Intake Manifold Cover.
•
Reinstall Intake Manifold Cover retainer screw (T30) and torque to 9.0 Nm (80 lb-in).
•
Reinstall Engine Oil Fill Cap.
•
Engine Calibration must now be installed at an Authorized GM Dealer.
•
Note: This kit includes a calibration update for the Engine Control Unit. Reprogramming is done with a Service
Programming System at an Authorized GM Dealer. When reprogramming, the GM dealer needs to call the Techline
Customer Support Center (TCSC). The TCSC will provide a Vehicle Configuration Index (VCI). The VCI is good for only
one specific Vehicle Identification Number (VIN). Call TCSC (1-888-337-1010) to obtain a VCI number. You must have the
vehicle's VIN that will be upgraded and the Authorization Code provided at the bottom of the first page of this instruction
sheet.
Chevrolet Performance Air Induction Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
84099784
REV 22FE17
PART NO.
DATE
26SE16
Initial Release - Benjamin Kaminsky
22FE17
Revision - Benjamin Kaminsky
12
SHEET
REVISION
36
OF
AUTH
2545956
2642462