Assembly And Adjustments Before Operating - Nogueira PN-MASTER 3000 Manual De Instrucciones

ASSEMBLY AND ADJUSTMENTS
BEFORE OPERATING
Assembly of the detached parts
The parts described below are delivered
disassembled to facilitate the machine
transport. Assemble it according next steps:
Feeding nozzle (1)
Install the feeding nozzle (1) according picture
aside and fasten it through pin (1a) and cotterpin
(2b), which are together with the detached items
that follow the machine.
Rotary discharge tube (2)
Install the discharge tube (2) on the nozzle (2a)
according picture below, fastening it with three
bolts (2b), three springs (2c) and six nuts (2d).
10
2
1
1b
1a
Instructions manual
2b
2c
2d
Note:
Observe the correct assemble position
of the elements by side.
Fasten the nuts (2d) to press the spring
(2c), so that it is possible to rotate the
chute (2) manually without doing a lot of
effort.
2a