METRICA 60719BM Manual Del Usuario página 8

the wall. Place the unit in an upright position and keep the inclina-
tion of the instrument within the range of -5° to +5°.
OPERATION
Power
1. Press the ON/OFF button to activate the automatic levelling
function, the power indicator (Led) will light. 2.
2. When the power indicator (Led) is lit, it indicates that the
voltage of the batteries is insufficient. Then the rechargeable
batteries must be charged.
3. Press the ON/OFF button again to turn off the unit, the power
indicator goes out.
Levelling
Press the ON/OFF button to start automatic levelling, the laser
beam flashes. After automatic levelling, the laser module rotates
to the right at a speed of 600 rpm. 2. When the instrument is in
operation, the laser beam flashes.
If the instrument is improperly positioned or the inclination of the
instrument exceeds the range of -5° to +5°, the mode indicator
and the laser beam will flash simultaneously. Re-position the in-
strument within the self-levelling range.
Note: The unit turns off automatically after five minutes of
alarm.
8
ROTATION
Continuous rotation
Press the speed button to control the rotation speed of the laser
module. By repeatedly pressing the key, the speed of the laser
module changes continuously as follows: 0-60-120-300-600-
600-0 rpm.
Step Turning
Set the speed to 0 rpm, the laser module stops. Press the key
The laser module rotates clockwise. If you press the left turn but-
ton, the laser module moves counterclockwise.
Scanning
1. Press the scanning button; the laser module scans directional-
ly. If you press the button repeatedly, the scanning angle of the
laser module changes continuously as follows: 0°- 10°- 45°-
90°- 180°- 0°.
1. Press the Left Rotate key or the Right Rotate key to change the
scan direction.
TILT ADJUSTMENT (WITH REMOTE CONTROL)
When the unit is set upright to scan horizontally, the tilt of the
X-axis and Y-axis can be adjusted. Press the Manual/Automatic
button when the mode indicator is lit and the unit switches to the
manual leveling mode.