Remote Control; Accuracy Check - METRICA 60719BM Manual Del Usuario

Inclination of the X axis
Align the X1 beam with the direction of the tilt required for
adjustment, as shown below:
Y2
X2
Y1
Press the buttons or
down.
Inclination of the Y-axis
Align the Y1 beam with the direction of the tilt required for
adjustment.
Press the keys or
or down.
Notes: Press the Manual/Automatic button again when the
mode indicator goes off, the instrument switches to the au-
tomatic levelling mode.
X1
to move the laser beam up or
buttons to move the laser beam up

REMOTE CONTROL

The remote control of the device transmits via
infrared technology.
Point the opening of the infrared beam at the la-
ser device (as shown below) to use the remote
control (distance: inside: 30 m; outside: 20 m).
The keyboard has 9 keys; the display on the unit
flashes to indicate that the operating signal has
been sent after pressing any key.
Remote control functions:
1. Rotation speed
2. Scan
3. Direction of rotation step by step
4. Manual / Automatic levelling
5. Slope adjustment: manual method

ACCURACY CHECK

Place the device 50 m away from a wall, then align the device in
direction X1 (see drawing):
Remote control
9