Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
13.2
Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the
operator and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions
•
Keep your work area dry and tidy! An untidy work area may cause
accidents. Avoid slippery floor.
•
Make sure the work area is lighted sufficiently
•
Install the machine so that there is sufficient space for safe operation
and workpiece handling
•
Do not overload the machine
•
Provide good stability and keep balance all times
•
Avoid abnormal working postures! Make sure you stand squarely and
keep balance at all times.
•
Always stay focused when working. Reduce distortion sources in your
working environment. The operation of the machine when being tired,
as well as under the influence of alcohol, drugs or concentration
influencing medicaments is forbidden.
•
Do not climb onto the machine!
•
The machine must be operated only by trained persons (knowledge and
understanding of this manual), which have no limitations of motor skills
compared with conventional workers..
•
Do not allow other people, particularly children, to touch the machine or
the cable. Keep them away from your work area.
•
Make your workshop childproof.
•
Make sure there is nobody present in the dangerous area. The minimum
safety distance is 2m
•
Wear suitable work clothes! Do not wear loose clothing or jewelry as
they might get caught in moving parts and cause severe accidents! Wear
a hair net if you have long hair.
•
Loose objects can become entangled and cause serious injuries!
•
Use personal safety equipment: ear protectors and safety goggles when
working with the machine.
•
Do not wear safety gloves!
•
Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine stops.
•
Always disconnect the machine prior to any actions performed at the
machine.
•
Avoid unintentional starting
•
Do not use the machine with damaged switch
•
The plug of an electrical tool must strictly correspond to the socket. Do
not use any adapters together with earthed electric tools
•
Each time you work with an electrically operated machine, caution is
advised! There is a risk of electric shock, fire, cutting injury;
•
Protect the machine from dampness (causing a short circuit)
•
Use power tools and machines never in the vicinity of flammable liquids
and gases (danger of explosion)
•
Check the cable regularly for damage
•
Do not use the cable to carry the machine or to fix the work piece
•
Protect the cable from heat, oil and sharp edges
•
Avoid body contact with earthed
HOLZMANN MASCHINEN GmbH
www.holzmann-maschinen.at
SAFETY
21
VD 1100ECO
Publicidad
Tabla de contenido
