Technical Data; Troubleshooting - EMAK T327 Manual De Uso Y Mantenimiento

7) To check the available charge, press the Battery Fuel Gauge
button (E).
8) As soon as the green light (F) lights up to indicate that the
battery is fully charged, you can remove the charger.
9) When not in use, disconnect the battery charger from the
battery.
WARNING! If the rechargeable battery pack fails to
charge, check whether there is voltage at the socket
outlet. If you are still unable to charge the battery, contact
an authorised service centre. Timely recharging of the
battery will help it to serve you well for a long time.
STORING THE BATTERY CHARGER
Store the battery charger out of children's reach in a dark and dry
place at above-zero temperatures. Store the battery charger only in
dry places with an ambient temperature of 10-40°C. Store and
transport the battery charger in its original packaging.

TECHNICAL DATA

Mains input voltage
Available output voltage/current
BATTERY CHARGER WARRANTY CERTIFICATE
This machine has been designed and manufactured using the most
modern techniques. The company guarantees its products for 24
months from the date of purchase, for home and leisure use. The
warranty is limited to 12 months in the case of professional use.
PROBLEM
The battery charger fails to charge the
battery (no light on)
The battery charger fails to charge the
battery (no light on)
The undersigned,
declares under its own responsibility that the machine:
1. Type:
2. Trademark: / Type:
complies with the requirements
established by directive
conforms with the provisions of the
following harmonised standards:
Imported by:
Date:
Technical documentation filed in:
100V - 240V 50/60 Hz
12,6V 2.0

TROUBLESHOOTING

POSSIBLE CAUSE
No power supply to the battery charger
Defective battery charger or cable
DECLARATION OF CONFORMITY
EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
BATTERY CHARGER
XSG1262000EU - CH1262000EU
2014/35/EU - 2014/30/EU - 2011/65/EU
EN 60335-1:2012/A11:2014 - EN 60335-2-29:2004/A11:2018 - EN 61000-3-2:2014
- EN 61000-3-3:2013 - EN 55014-1:2017 - EN 55014-2:2015
Bagnolo in piano (RE) Italy - via Fermi, 4
01/08/2020
the administrative authorities. - Technical Department
Limited warranty
1) The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical assistance
network, will replace free of charge any parts proven defective in
material, machining or manufacturing. The warranty does not
affect the purchaser's rights as established under legislation
governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary repairs in the
minimum time possible, compatible with organisational needs.
3) To make a claim under warranty, proof of purchase in the
form of an invoice or till receipt must be shown to the
authorised company representative.
4) The warranty becomes null and void if:
• The product has evidently not been serviced correctly
• The machine has been used for improper purposes or has
been modified in any way
• Unsuitable lubricants and fuels have been used
• Non-original spare parts or accessories have been fitted
• Work has been done on the product by unauthorised
persons
5) The warranty does not cover consumables or parts subject to
normal wear.
6) The warranty does not cover work to update or improve the
machine.
7) The warranty does not cover any preparation or maintenance
work required during the warranty period.
8) Damage incurred during transport must be immediately brought
to the attention of the carrier: failure to do so shall render the
warranty null and void.
9) The warranty does not cover injury or damage caused directly or
indirectly to persons or property by periods of extended disuse of
the machine resulting from the said defects.
Check the plug is inserted and that the
socket outlet is receiving power
Replace the battery charger
SOLUTION
s.p.a.
Fausto Bellamico - President
11