Sanus accents SANA1A Manual De Instrucciones página 10

STEP 4 Attach Cable Cover Wall Plates
CAUTION:
Avoid potential personal injuries and property damage!
●
Drywall covering the wall must not exceed 16 mm (5/8 in.)
●
Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1 1/2 x 3 1/2 in.)
1. Locate your studs. Verify and mark the centers of the studs by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the cable cover wall plate
1
10
08
at your desired height and line up the holes with your stud center lines. Level and mark the hole locations.
Wood Stud Option
2
08