Sanus accents SANA1A Manual De Instrucciones página 12

STEP 4 Attach Cable Cover Wall Plates
CAUTION:
Avoid potential personal injuries and property damage!
●
Drywall covering the wall must be at least 13mm (1/2 in.)
●
Do not install anchors into the seam between drywall pieces
1. Position the cable cover wall plate
2. Drill pilot holes using an 8 mm (5/16 in.) diameter drill bit.
1
08
12
08
at your desired height, level and mark the hole locations.
Drywall Option
2
25 mm
(1 in.)
8 mm
(5/16 in.)