Troubleshooting; Accessories/Spare Parts - SpeedClean FLOWJET Instrucciones De Operacion Y Mantenimiento

Specifications
Motor/ Power Requirements (115 V Model)
Motor/ Power Requirements (230 V Model)
Water Requirements
Maximum Inlet Water Pressure
Maximum Output Water Pressure
Weight
Maximum Inlet Water Temperature
Maximum Ambient Operational Temperature

Troubleshooting

PROBLEM
Inconsistent and/or erratic pressure
Motor stops abruptly
Motor buzzes but fails to start
Unit does not spray chemical

Accessories/Spare Parts

Accessory/Spare Part
15° Rinsing Nozzle (Yellow)
25° Soaping Nozzle (Yellow)
Spray Gun Assembly (with 18" Lance Attached)
Primary Hose Assembly – Connects to Pump (12 ft)
Extension Hose Assembly (12 ft)
Spray Gun Assembly without Lance (optional)
18" Extension Wand (optional)
40" Condenser Needle - Sectional Two Piece (optional)
Replacement Water Seal Kit for Pump
TM
FlowJet Manual
3/4 HP AC Motor (1φ) / 115 VAC / 12.5 Amps
1 HP AC Motor (1φ) / 230 VAC / 5.7 Amps
2.5 Gallons per Minute (2 GPM 50 Hz)
100 PSI (6.8 BAR)
400 PSI (27.2 BAR)
35 lbs
125°F (52°C)
104°F (40°C)
PROBABLE CAUSE

Nozzle clogged

Inadequate water supply

Motor Thermal breaker tripped

Inadequate Power Supply

Siphon injector clogged

Pickup hose not in chemical
Part #
CJ-QDN-1508Y
CJ-QDN-LP25
CJ-RCC-23
CJ-RCC-13
CJ-HF-EXTHOSE
SC-RCC-14
CJ-9655
CJ-WWSS-HF
RCC-09-SK
REMEDY

Clean nozzle orifice

Ensure 2.5 GPM minimum

Turn off, let unit cool

Check for proper voltage/current

Inspect and clean siphon

Put hose to bottom of chemical
P a g e | 3