Transportation And Storage - Gude GWS 700 HM-2 Traducción Del Manual Original

The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
For cleaning and maintenance, the following
safety guards must be removed: Additional safety
device for saw blade protection
After carrying out the work, all safety guards
must be reinstalled again correctly! See image
description.
The machine must not be used under any
circumstances if the machine or the safety devices
are damaged. Replace any worn and damaged
parts.
Before use check appliance, cable, extension cord and
plug for any damages or material fatigue.
Errors in the machine, including the guard or the bla-
de shafts, must be reported to the person responsible
for safety as soon as they are discovered.
Before pressing On/Off, make sure the saw blade has
been fitted properly.
The saw must not be used any longer if the cradle
fails to automatically return to the rest position.
The saw must not be used any longer if the saw
blade fails to stop in 10 seconds after switching the
machine off.
For security, use devices such as safety- and pressure
device, guide slide, rip fence, etc.
Removing sawdust and chippings from the machine
when running is strictly prohibited.
It is necessary to refrain from removing any cuttings
and parts of workpieces from the cutting area.
Do not use saw blades which are damaged or
deformed
Properly sharpened saw blades to be used only.
Follow instructions for use, adjustment and repair of
saw blades of manufacturers.
Do not use saw blades not corresponding to the key
data given in these instructions for use.
The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool.
Only use tools that meet standard EN 847-1.
Transport and store the tools in a suitable receptacle;
To minimise noise production, the tool must be
sharpened and all elements for noise minimisation
(covers, etc.) must be properly adjusted.
Replace the table insert when worn
Familiarise with the safety procedures for cleaning,
maintenance and regular removal of sawdust and
dust to reduce the risk of fire.
Make sure the flange used is suitable for the given
purpose of use, as specified by the manufacturer.
Use only original accessories and original spare parts.
Switch the machine immediately off when blocked.
Unplug the machine and remove the stuck piece of
wood.
Ensure the working space has sufficient general or
targeted lighting.
Observe the maximum speed indicated on the saw
blades.
Ensure that the separating safety equipment and
other safety equipment which is necessary for
operating the machine is fitted, is in a good operating
condition and is properly serviced.
The operating personnel must have received suffici-
ent training in use, setup and maintenance.
Installation and larger-scale repair work may only be
carried out by personnel who have received special
training.
Notices relating to restrictions on use in places where
the fire risk may be high.

Transportation and Storage

The machine may only be lifted and transported by
qualified staff with adequate equipment.
Safe position and balance to be provided for trans-
port. Make sure the device cannot roll away, fall over
or tip over with suitable fastening devices.
Machine to be stored in locked spaces, out of reach
of children.
Disposal
Any damaged or disposed electric or electronic
devices must be delivered to appropriate
collection centres.
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually
chosen based on environment aspects and waste
treatment principles and are therefore recyclable. Re-
turning the packaging into material circulation saves
raw materials and reduces waste production. Parts of
packagings (e.g. foils, styropor®) can be dangerous
for children.
Risk of suffocation!
Keep parts of the packagings out of reach of children
and dispose them as soon as possible.
ENGLISH
29