Technical Data; Specified Conditions Of Use; English; Emergency Procedure | Symbols | Maintenance | Disposal | Guarantee | Service - Gude GWS 700 HM-2 Traducción Del Manual Original

Technical Data

Log Cutting Saw
Art. No
Rated voltage / Frequency
Rated power
Safety class
Protection type
No-load speed
Saw blade dia. x hole dia
Saw blade thickness
Loading max.
Workpiece diameter
Workpiece length
Enlargement Log Cutting Saw
Width Log Cutting Saw
Weight
Noise details
Sound pressure level L
pA
Measured sound power level
L
WA
Guaranteed sound power level
L
WA
1) Measured according to EN ISO 3746: 2010, loaded, hazardousness K=4 dB (A)
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Although there is a correlation between emission levels and environmental impact levels, whether
further precautions are necessary cannot be derived from this. Factors in uencing the actually present environ-
mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work processes. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
* The S6-40% indicates a load profile of 4 min load and 6 min idle time
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
The operating personnel must have received suffici-
ent training in use, setup and maintenance.
GWS 700 HM-2 GWS 700 ECO-2
01718 01722
400 V / 50 Hz 400 V / 50 Hz
5,2 kW, S6/40%* 5,2 kW, S6/40%*
F F
IP 54 IP 54
1420 min 1420 min
-1
700 mm x 30 mm 700 mm x 30 mm 600 mm x 30 mm 500 mm x 30 mm
4,2 mm 3 mm
50 kg 50 kg
80 mm - 240 mm 80 mm - 240 mm 80 mm - 220 mm 80 mm - 180 mm
500 - 1000 mm 500 - 1000 mm
106 kg 106 kg
102 db (A) 102 db (A)
115 dB(A) 115 dB(A)
119 dB(A) 119 dB(A)

Specified Conditions of Use

The circular saw for firewood is used for cross cutting
of firewood. It is necessary to follow all technical
specifications and safety instructions.
Pieces of wood that are too short, too light or too
thin to get caught by the barbs in the feed cradle
must not be processed by the machine.
The machine may only be used if it is fully assem-
bled.
Operation of a machine that is not fully assem-
bled is strictly prohibited.
person.
Make sure there is nobody present in the dange-
rous area. The minimum distance is 2 m.
GWS 600 ECO-2
01723
400 V / 50 Hz
4,0 kW, S6/40%*
F
IP 54
1420 min
-1 -1
3 mm
50 kg
500 - 1000 mm
104 kg
102 db (A)
115 dB(A)
119 dB(A)
The machine may only be operated by one

ENGLISH

25
GWS 500 HM-2
01725
230 V / 50 Hz
2,6 kW, S6/40%*
F
IP 54
2800 min
-1
2,8 mm / 3,8 mm
50 kg
500 - 1500 mm
450 mm
750 - 1200 mm
77 kg
102 db (A)
108 dB(A)
112 dB(A)