Starting; Working Principles; Accessories; A) Accessories Included - DIPRA SPIDO EC 300 Manual Del Usuario

1. STARTING

1. Connect a garden hose (19mm) with a quick connector
2. Attach the pump to the edge of your tank (if necessary) using the butt (6), or immerse
the pump in water. If the pump rests on the bottom, make sure it is on a flat and stable
place.
3. Make sure that no one is present in the liquid to be pumped
4. Plug the pump to the mains
5. Open the Ball valve (7)

2. WORKING PRINCIPLES

The pump has a float which start and stop the pump automatically, depending on the water level.
Manual mode:
When the float is hung head up (see below cons), the pump starts
and stops when the user disconnects the pump, or release the float
(if the water level is below the height at which the float operates
the pump).
Warning: in this mode, if the water runs out, your pump will be
severely damaged. Avoid dry running.

3. ACCESSORIES

a) Accessories included

The pump SPIDO EC 300 is delivered with:
- A telescopic rod
- A ball valve
- A quick connector (male)

b) Other accessories

Ref 298361
Ref 006192
5