Install The Handles - Kohler K-T428 Guia De Instalacion

Lever
Handle
Assembly
Valve
Stem
Spline

3. Install the Handles

Classic Handles
Remove the plaster guards.
Close the valves (hot = clockwise, cold = counterclockwise).
Install a stem extension onto each valve stem spline. Make sure
that the splines are engaged.
Thread the handle onto the valve body. Make sure the splines in
the handle and stem extension are engaged.
For Lever Handles: Orient the lever handles with the levers
pointing away from the spout while in the closed position.
NOTE: The stem extension allows fine adjustment of the handle
alignment. To adjust, remove the handle and reposition the stem
extension.
Reinstall the handle and check the alignment. Repeat until the
handle alignment is satisfactory.
Kohler Co.
Cross
Handle
Assembly
Stem
Extension
Valve
Body
5 1049622-2-B