Removing The Grass Bag; Operating The Bag-On-Demand Lever; Side-Discharging The Clippings - Toro Flex-Force Power System MAX Recycler Manual Del Operador

Removing the Grass Bag

To remove the bag, reverse the steps in
Operating the
Bag-on-Demand Lever
The bag-on-demand feature allows you to either
collect or recycle grass and leaf clippings while the
grass bag is attached to the machine.
•
To bag the grass and leaf clippings, press the
button on the bag-on-demand lever and move the
lever forward until the button on the lever pops up
(Figure 13).
Figure 13
1. Bag-on-demand lever (in
the recycling position)
•
To recycle or side-discharge the grass and
leaf clippings, press the button on the lever and
move the lever rearward until the button on the
lever pops up.
Important:
For proper operation, remove
any grass clippings and debris from the
bag-on-demand door and the surrounding
opening (Figure 14) before you move the
bag-on-demand lever from 1 position to
another.
Figure 14
1. Clean here
Installing the Grass Bag (page
g251583
2. Bag-on-demand lever (in
the bagging position)
g251584
14).
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the
bag-on-demand lever is in the Bagging position, move
the lever to the Recycling position; refer to
the Side-Discharge Chute (page
Installing the Side-Discharge
Chute
Unlatch and lift up the side deflector and install the
side-discharge chute
Removing the Side-Discharge
Chute
To remove the side-discharge chute, lift up the side
deflector, remove the side-discharge chute, and lower
the side-discharge deflector until it latches securely.
15
Removing
15).
(Figure 15).
Figure 15
g235646