Yamaha R-N803 Manual De Instrucciones página 32

Listening to FM/AM radio
LINE 1
TUNER
TUNER
BAND
BAND
MEMORY
Cursor keys B / C
ENTER
HOME
SETUP
NOW PLAYING
1
Press TUNER to select "TUNER" as the input
source.
2
Press OPTION on the remote control.
The "Option" menu is displayed (p. 46).
3
Use the cursor keys (B / C) to select "Auto
Preset", and then press ENTER.
OPTION
Auto Preset
READY
01:FM 87.5 MHz
Preset number
This unit starts scanning the FM band about 5
seconds later from the lowest frequency upwards.
To begin scanning immediately, hold down ENTER.
Note
• Before scanning begins, you can specify the first preset number
to be used by pressing PRESET j / i or cursor key (B/C) on the
remote control.
• To cancel scanning, press BAND or RETURN.
When scanning is complete, "FINISH" is displayed and
then the display returns to original state.
26
En
LINE 2 LINE 3
NET USB
TUNING
PRESET j / i
PRESET
ENTER
RETURN
RETURN
OPTION
OPTION
VOLUME
MUTE
A
VOL.
A
VOL.
Frequency
■
Registering a radio station manually
BAND
MEMORY
MEMORY
HOME
SETUP
1
Follow "FM/AM tuning" (p.25) to tune into the
desired radio station.
2
Press MEMORY.
Note
By holding down MEMORY for more than 3 seconds, you can
skip the following steps and automatically register the selected
station to an empty preset number (i.e., the preset number
following the last preset number used).
3
PRESET j / i to select the preset number to
which the station will be registered.
If you select a preset number to which no station is
registered, the message "Empty" is displayed.
9850
02:Empty
"Empty" (not in use) or the frequency currently registered
4
Press MEMORY.
When registration is complete, the display returns to
the original state.
Note
To cancel registration, press RETURN.
TUNING
PRESET j / i
PRESET
ENTER
RETURN
RETURN
OPTION
VOLUME
STEREO TUNED
A
VOL.