Setup Menu Items; Network - Yamaha R-N803 Manual De Instrucciones

Configuring various functions (Setup menu)

Setup menu items

Menu item
Connection
Information
IP Address
DMC Control

Network

Standby
(Network Standby)
Network Name
Update (Network Update) Updates the firmware via the network.
On/Off
Bluetooth
Standby
(Bluetooth Standby)
YPAO On/Off
YPAO
(Speaker A, Speaker B,
VOL
Speaker A+B)
(YPAO Volume)
Max Volume
Volume
Initial Volume
AutoPowerStdby
(Auto Power Standby)
ECO Mode
Network
Configures the network settings.
■
Connection
Selects the network connection method.
Select this option when you want to connect
the unit to a network with a commercially-
Wired
available network cable (p. 14).
Select this option when you want to connect
the unit to a network via the wireless router or
Wireless
access point (p. 16).
Select this option when you want to connect a
mobile device to the unit directly. For details
WirelessDirect
on settings, see "Connecting a mobile device
to the unit directly (Wireless Direct)" (p. 19).
Note
When this unit is in the MusicCast extended mode, "Extend" is
displayed. For details on the extended mode, refer to "MusicCast
Setup Guide" on the Yamaha website.
48
En
Function
Selects the network connection method.
Displays the network information on the unit.
Configures the network parameters (such as IP address).
Selects whether to allow a DLNA-compatible Digital Media Controller
(DMC) to control playback.
Selects whether to enable/disable the function that turns on the unit from
other network devices.
Edits the network name (the unit's name on the network) displayed on
other network devices.
Enables/disables the Bluetooth functions.
Selects whether to enable/disable the function that turns on the unit from
Bluetooth devices (Bluetooth standby).
Enables/disables the reflection of the YPAO measurement.
Enables/disables the YPAO volume function.
Sets the maximum volume to prevent excessive loudness.
Sets the initial volume for when this receiver is turned on.
Sets the amount of time for the auto standby function.
Enables/disables the eco mode (power saving mode).
■
Information
Displays the network information on the unit.
NEW FW
Available
STATUS
MC NET
MAC
SSID
IP
SUBNET
GATEWAY
DNS P
DNS S
Appears if an update for this unit's firmware is
available (p. 54).
The connection status of the network.
Status of the MusicCast Network. If "Ready"
appears, you can use the MusicCast
CONTROLLER app.
Displays MAC address of the unit. MAC
address will vary depending on the connection
method (wired LAN connection or wireless
LAN / Wireless Direct connection).
(When using wireless LAN connection or
Wireless Direct) The SSID of this unit on the
wireless network.
IP address
Subnet mask
The IP address of the default gateway
The IP address of the primary DNS server
The IP address of the secondary DNS server
Page
48
48
49
49
49
49
50
50
50
50
50
50
50
51
51