Craftsman CMXGZBF7124612 Manual De Instructiones página 4

ENglISh
inStrUCtiOnS fOr t100 CMX MODeL
trACtOrS
Step 1: (fig. 1)
1. Open parts bags labelled (A) and (C) and verify that all
parts are present.
NOTE: Not all items in the parts bags will be needed.
Discard unneeded items after assembly is completed
Ref. Part Qty. Description
C 44072
D 47674
E 48106
F 47856
G 43001
H 46584
I 43182
PARTS BAG (A)
C
PARTS BAG (C)
E
H
Step 2: (fig. 2)
1. Place plug on a work bench or solid table and push end
of bumper down onto plug. Repeat for all plugs.
BUMPER
PUSH DOWN
WITH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
2
4 Whizlock Nut, 3/8"
4 Plug
2 Shoulder Bolt, 3/8-16 x .9"
2 Lag Screw, 5/16 x 3/4"
2 Hex Bolt, 3/8-16 x 1"
2 Whizlock Nut, 5/16"
2 Hex Blot, 5/16 x 3/4"
D
F
I
FIGURE 1
PLUG
D
FIGURE 2
t100 CMX frAMe
Step 3: (fig. 3)
1. Assemble a 3/8" - 16 x 0.9" shoulder bolt (E) and 3/8"
whizlock (C) nut to each side of the tractor frame.
Tighten.
CAUTION! Muffler is hot! Allow engine to cool
down before proceeding with bumper installation.
3/8" WHIZLOCK
Step 4: (fig. 4)
1. Slide the lower slots of the bumper onto the shoulder
bolts you assembled to the tractor frame in step 3.
G
Step 5: (fig. 5)
1. Assemble a 5/16 x 3/4" lag screw (F) to the bumper
and tractor frame.
2. Repeat for the other side
NUT
(C)
SHOULDER
BOLT
(E)
FIGURE 3
FIGURE 4
LAG
SCREW
(F)
FIGURE 5