Craftsman CMXGZBF7124612 Manual De Instructiones página 5

inStrUCtiOnS fOr 247 MODeL trACtOrS
Step 1: (fig. 1)
1. Open parts bags labelled (A) and (C) and verify that all
parts are present.
NOTE: Not all items in the parts bags will be needed.
Discard unneeded items after assembly is completed
Ref. Part Qty. Description
C 44072
D 47674
E 48106
F 47856
G 43001
H 46584
I 43182
PARTS BAG (A)
C
PARTS BAG (C)
E
H
Step 2: (fig. 2)
1. Place plug on a work bench or solid table and push end
of bumper down onto plug. Repeat for all plugs.
BUMPER
PUSH DOWN
WITH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
4 Whizlock Nut, 3/8"
4 Plug
2 Shoulder Bolt, 3/8-16 x .9"
2 Lag Screw, 5/16 x 3/4"
2 Hex Bolt, 3/8-16 x 1"
2 Whizlock Nut, 5/16"
2 Hex Blot, 5/16 x 3/4"
D
F G
I
FIGURE 1
PLUG
D
FIGURE 2
iDentify yOUr trACtOr frAMe
Step 3: (fig. 3)
1. Look at the side of your tractor frame directly below
the hood. If you have a frame that looks like TYPE 1
frame, use the TYPE 1 assembly instructions on page
4. If you have a frame that looks like TYPE 2 frame,
use the TYPE 2 assembly instructions on page 4.
TYPE 1
TYPE 2
NOTE: Only the front of the tractor frame is
shown
ENglISh
FIGURE 3
3