To Operate Air Wing; Rx-7Gp / Corsair-V; To Remove/Replace Breath Deflector; Rx-7Gp / Corsair-V / Quantum-St / Rx-Q / Signet-Q / Vector-2 / Rebel - Arai Helmet 2012 Manual De Instrucciones

OPEN
OPEN
q w
8
CLOSE OPEN CLOSE
OPEN CLOSE
CLOSE
5
4
3
2
1
English
NOTE:
Do not use oils or waxes to lubricate vents or other moving parts. If you
must lubricate such components, sparingly use the silicone lubricant
supplied with your helmet for eyeport trim dressing.

TO OPERATE AIR WING

RX-7GP / CORSAIR-V

The Air Wing helps reduce drag and turbulence at speed. Its angle is
adjustable in 5 positions for different riding positions.
To change the angle to down positions, with pushing the center of Wing's
rear edge forward to release the lock system, push it down to the desired
angle.
NOTE:
The angle can only be changed to down positions when the lock system
is released.
To change the angle to up positions, simply push up
the center of Wing's rear edge to the desired angle.

TO REMOVE/REPLACE BREATH DEFLECTOR

RX-7GP / CORSAIR-V / QUANTUM-ST / RX-Q / SIGNET-Q / VECTOR-2 / REBEL

To remove the breath deflector, grasp either side of the edge and pull
upward and toward to opposite end.