Connecting Antennas; Connecting The Am Loop Antenna; Connecting The Fm Antenna - Yamaha CRX-E320 Manual De Instrucciones

To enjoy radio on this unit, you need to connect FM/AM antennas to this unit. This product includes an indoor FM
antenna and AM loop antenna. If the radio wave reception is weak in your area or you want to improve the radio wave
reception, we recommend that you use outdoor antennas. For details, consult the nearest authorized Yamaha dealer or
service center.
Indoor FM
antenna
(supplied)
MAINS
TUNER
FM ANT
AM
75Ω UNBAL.
UT
GND ANT
L
R
About grounding
For the maximum safety and minimum interference,
connect the antenna GND terminal to a good earth ground.
A good earth ground is a metal stake driven into the moist
earth.

Connecting the AM loop antenna

1
Attach the antenna stand to the antenna.
y
When attaching the antenna on the wall, you do not need to use
the antenna stand.
2
Press and hold the tab.

Connecting antennas

AM loop
antenna
(supplied)
Ground
(GND terminal)
3
Insert one of the AM loop antenna lead wires
into the AM ANT terminal.
4
Release the tab.
5
Repeat steps 2 to 4 to insert the other AM
loop antenna lead wires into the GND
terminal.
Place the antenna away from this unit and speaker
cables.
y
While listening to the radio, rotate the antenna head to find the
best angle for reception.

Connecting the FM antenna

Connect the supplied indoor FM antenna to the
FM ANT jack on this unit.
Place the antenna away from this unit and speaker cables.
CONNECTING ANTENNAS
11
En