Finishing Cycle - Sidi M - 781 Instalación Funcionamiento Y Mantenimiento

E N G L I S H
• 2° time: steaming mixed with air, • 2° time: steaming mixed with air,
• 3° time: pause, • 3° time: pause,
• 4° time: drying. • 4° time: drying.
Examples of finishing times: Examples of finishing times:
•
1° time
0 5 10
•
2° time
0
•
3° time
•
4° time
To see the complete list of programs in the
memory press the
To be able to access to the variation of the
ironing times of a program, it is necessary to
position on the requested program (example
"P0"). Press a first time the
the steaming time (at the same time the steam
warning light will begin to light).
By operating on the
possible to plan the value of the requested
"steaming" time: from 0 to 99 seconds, the time
can be varied of 1 second at a time, while over 99
seconds, one minute and forty seconds will be
visualized (1.40) and the times can be planned to
intervals of 10" (1' .50", 1' .60"...) till a maximum
of nine minutes and fifty seconds (9' .50").
Planned the "steaming" time, press the
to confirm it and to be able to visualize the
"steaming mixed with air" time, at the same time
the warning lights
light. By operating on the
possible to plan the value of the requested time.
Press the key to confirm the value of the
planned time and to be able to accede to the
planning of the "pause" time; continue the same
procedure till the "drying" time.
At the end of the planning of the last time, by
pressing the key, the value of the planned
5
5
0
0 5 10 15
20
key.
key to visualize
and keys it is
and will begin to
and keys it is
C H A P T E R 4
time will be confirmed and you will go out from the
planning of the ironing times.
When you have selected the desired program,
press the pedal "POS. 53" or the
the ironing cycle. If you want to stop the ironing
cycle before its completion, press the
USING THE MANUAL AIR FUNCTION
INTEGRATED FAN ON/OFF
The function turns on the fan, which blows
warm air on the item, and at the same time the
warning light
This function is used when it is necessary to
prolong the drying time of the cycle in use or when
the item needs to be only dried. Press the
key once, the fan turns on; press it again and it
stops. Pressing the
of the time T4, the machine will get ready to
continue the phase of ventilation at the end of the
calculation of the drying time till will be pressed
the key
function for the subsequent cycles).
USING THE MANUAL STEAM FUNCTION
With standing machine, pressing the
steam will be operated (at the same time the
warning light
keys will be pressed.
Pressing the
steaming time, the machine will be ready to
continue the steaming phase at the end of the
key
calculation of the relative time till when
will be pressed; then the cycle will continue the
other 3 phases.
(SEE DRAWINGS PAGES 13-1 AND 13-2)
♦ For overalls, blouses and jackets steam air
former (with sleeve expanders device) (see
page 13-2).
Proceed as follows:
a) To connect the sleeve expander device
with the relative air operated clamps:
Page 4-5 Page 4-5
will light.
key during the calculation
(or to memorize the manual
will light) till the
key during the calculation of the

FINISHING CYCLE

E N G L I S H
key to start
key.
:
:
key
or
key