AT-OS AF2 P-LINE Instrucciones Operativas página 45

Tel. ++39 045 6159411- Fax ++39 045 6159422 - e-mail: info@at-os.com – www.at-os.com
The RESET key is inactive during the wash cycle to prevent the machine from being
stopped before the items have been disinfected (thermal model only).
To operate the machine just select the program on the control panel by touching the key related to the desired cycle: normal,
reduced, intensive or rinse. Now the machine works automatically, locks the door opening and starts the selected cycle. In case of
failure the machine stops automatically and the display shows the cause that interrupts the wash cycle.
Once the wash cycle is terminated just open the door and remove the material that has been washed.
A safety device prevents the door from being opened until the temperature inside the basin
is lower than 75°C and the temperature inside the steam generator is lower than the boiling
temperature of water. Those models, which are not set for final rinse, are equipped with a
different safety device that prevents the door from being opened until the temperature of
the instruments have cooled down in order to avoid danger to users.
AT-OS S.r.l.
Viale del Lavoro, 19 37030 Colognola ai Colli (Verona) Italy
INTENSIVE WASH program key (wash program number 3)
Phase 1: cold water rinse
Phase 2: short rinse with hot water mixed with detergent
Phase 3: rinse with hot water mixed with detergent
Basin heated by steam.
Phase 4: disinfecting at about 85°C for at least 60 seconds (thermal
model only).
Phase 5 (optional): basin cool-down by a short rinse with hot water
Total cycle time: approx. 8 minutes.
DUMP SINK WASHING key
Rinsing with blended water for dump sink washing
RESET key
It restores machine operating functions after stoppage caused by an
alarm.
EXTRA program key
Button for activation of an extra program. It can be used as UPS program
or as special program according the customer specifications.
MULTIWASHER program key
Button for activation of washing program for multiwasher basket AF66.
SOLVENT key (optional)
Upon pressing before selecting program a solvent liquid will be sprayed on
the bedpan in order to remove zinc creme left over.
45