AT-OS AF2 P-LINE Instrucciones Operativas página 49

Tel. ++39 045 6159411- Fax ++39 045 6159422 - e-mail: info@at-os.com – www.at-os.com
Alarm
E21: SteamGen Timeout steam generator is exceeded.
Alarm
E22: Sol. Valves Off
Alarm
E30: Softener Empty
Alarm
E31: Temp Not Reached
Alarm
E32: St.G. Heat: Tout
Alarm
E33: Tank Temp. Tout
Alarm
E40: StGen Overheated
Alarm
E41: Leak Perist.Pump
Alarm
E42: Clogged Siphon
Alarm
E43: Door open
Alarm
E44: Maintenance
Alarm
E50: Mos Det. Pump
Alarm
E51: Mos Solvent Pump
Alarm
E52: Mos SoftenerPump
Alarm
E53: Mos cycle Start
Alarm
E54: Mos Sol.Valve 1
Alarm
E55: Mos Sol.Valve 2
Alarm
E56: Mos Sol.Valve 3
Alarm
E57: Mos Sol.Valve 4
Alarm
E60: Mos Sol.Valve 5
Alarm
E61: Mos Sol.Valve 6
Alarm
E62: Mos Sol.Valve 7
AT-OS S.r.l.
Viale del Lavoro, 19 37030 Colognola ai Colli (Verona) Italy
Malfunction
Displayed at the start of a cycle wash phase when none of the solenoid valves
has been programmed to open.
Displayed when the anti-scale product is finished (the empty tank must be
replaced by a tank filled with the same liquid).
Displayed if the disinfecting temperature in the wash chamber is not reached in
the preset time interval.
Displayed if water in the steam generator does not reach a pre-disinfecting
temperature with the preset time interval.
(OPTIONAL) Displayed after a preset time period if the water in the storage
tank does not reach the preset temperature.
Warns the user when the steam generator overheats. A Technician must be
called in order to restore correct machine operation.
Displayed to warn that liquid leakage from a dosing pump has been detected.
Displayed to warn the user that the drain trap is clogged and consequently that
the machine cannot function properly until the problem is solved.
This appears when during a washing cicle the door is opened due to technical
or electrical reason.
This appears after a certain set number of cicles to indicate that the machine
requires a scheduled maintenance service check
Displayed when there is an electrical problem with the detergent pump.
Displayed when there is an electrical problem with the solvent pump.
Displayed when there is an electrical problem with the anti-scale pump.
Displayed when there is an electrical problem with the "cycle start" safety
command that gives consent for the heating coil to operate or the ETS valve
EV10.
Displayed when there is an electrical problem with solenoid valve number "1".
Displayed when there is an electrical problem with solenoid valve number "2".
Displayed when there is an electrical problem with solenoid valve number "3".
Displayed when there is an electrical problem with solenoid valve number "4".
Displayed when there is an electrical problem with solenoid valve number "5".
Displayed when there is an electrical problem with solenoid valve number "6".
Displayed when there is an electrical problem with solenoid valve number "7".
49
What to do