Crest Factor Interface - BIRD 5000-XT Libro De Instrucciones

Crest Factor Interface

Small Display
Key Button
Right Arrow
Left Arrow
Up Arrow
Down Arrow
OK Button
Menu Button
Log Button
+/-
. (2 Sec)
0 (2 Sec)
8 (2 Sec)
Menu & Log (2 sec)
Note: Crest Factor is the ratio of the forward peak power and the
forward Average power. It is measured in dB.
Note: The main measurement is in the larger display located
above the graph bar. The two smaller, secondary measurements
are located below the graph bar. All of these measurements vary
depending on the main measurement displayed.
Changes the Main Measurement to CCDF
Changes the Main Measurement to Forward Burst
Switch Fwd Ave (W, uW, mW, kW, dBm)
Switch Rfl Ave (W, uW, mW, kW, dBm)
Initiates Shutdown.
page 11
Goes to Main Menu
Goes to Logging submenu
Toggles between "Small" and "Large" Display
Performs a screen shot.
Screen Shot" on page 12
Zero/Cal Unit/Sensor
Turn On/Off Smoothing (*for Fwd Avg)
Language Selection Screen
Software Interfaces
Large Display
Action
See "Shutting Down" on
See "Performing a
21