Battery Replacement - BIRD 5000-XT Libro De Instrucciones

Battery Replacement

The Lithium Ion (Li18S) batteries do not normally need to be replaced. If
necessary, however, follow these instructions (see
Disconnect from external power before any disassembly.
Figure 5 Back Cover Removal
1. Lay the DPM, display side down, on a clean surface.
2. Remove the two mounting screws from the back cover.
3. Remove the back cover.
Note: Take care to not disconnect the battery connector.
4. Pull the battery strap and remove the old battery.
5. Install the new battery.
Note: Check the orientation of the positive and negative termi-
nals.
6. Replace the back cover.
7. Secure the back cover with the mounting screws.
WARNING
The potential for electric shock exists.
Mounting
Screws
Back Cover
Figure 5).
Battery
Maintenance
49