How To Install Your Canopy Housing; How To Assemble Your Ceiling Fan Blades - Fanimation DOREN FP8533 Serie Manual De Instrucciones

NOTE: This step is applicable after the neccessary wiring is completed.
1. Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket, taking care not
to pinch the wires. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that was
previously removed. (Figure 1)
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)
1. Remove and discard the five rubber motor
stops/screws from the motor assembly. (Figure 1)

How to Install Your Canopy Housing

WARNING

How to Assemble Your Ceiling Fan Blades

Blade Holder
HARDWARE USED:
3/16˝-24
WASHER HEAD
SCREWS
FIBER WASHERS
12
Ceiling Canopy
Figure 1
Canopy Screw
Figure 2
Cover
Motor Stops
Motor
Assembly
Figure 1
3/16˝-24
Washer Head Screws
and Fiber Washers
(3 each per blade)
Blade
Figure 2
x 15
x 15