A&D BA Serie Guia De Inicio Rapido página 14

EN
7. Error Displays (Error Codes)
Display Code
EC,E11
EC,E16
EC,E17
EC,E20
Stability error
Weighing value is unstable and "zero display", "sensitivity adjustment", etc.
cannot be executed. Check around the pan. Refer to the separate
instruction manual listed in "1.1. Detailed Manuals". Improve the
environment of the installation location (vibration, drafts, static electricity,
etc.). To return to weighing mode, press the CAL key.
Out of the setting range
The value to be set exceeds the setting range.
Set again within the setting range.
Malfunction of the internal memory element of the balance
If this error continues to be displayed, repair is necessary. Please contact
your local dealer for repair.
Internal mass error
Applying the internal mass does not yield a change in the mass value as
specified.
Confirm that there is nothing on the pan and perform the operation from the
beginning.
Internal mass error
The internal mass application mechanism does not function properly.
Perform the operation from the beginning.
Abnormality in the internal memory data of the balance
If this error continues to be displayed, repair is necessary.
Please contact your local dealer for repair.
Weighing unit error
Data from the weighing unit has not been received. Check the connection
between the weighing unit and the display unit, and turn the power off and
then on again.
Breeze break unit error
Communication with the breeze break is not connected.
Reconnect the cable between the breeze break unit and the weighing unit.
Serial number error
The serial numbers of the weighing unit and the display unit do not match.
Reconnect with the correct combination.
Sensitivity adjustment weight error (Positive value)
The sensitivity adjustment weight is too heavy. Check around the pan.
Check the sensitivity adjustment mass value.
To return to weighing mode, press the
Description
CAL key.
14