Maintenance - Health O Meter 500KL Instrucciones De Uso

MAINTENANCE

Maintenance
The following pages provide instructions for maintenance, cleaning, calibrating, and
troubleshooting of the 500KL scale. Maintenance operations other than those described in this
manual should be performed by qualified service personnel.
Caution: Before first use, or after long periods of non-use, check the scale for proper
operation and function. If the scale does not operate correctly, refer to qualified service
personnel.
1. Check overall appearance of the total scale for any obvious damage, wear, and tear.
2. Inspect the AC adapter cord for cracking or fraying, or for broken/bent prongs.
Note: This scale is an extremely sensitive weighing device. Items such as clothing or towels
placed or dropped on the scale may cause a scale to activate. In order to prevent battery
depletion, do not store or leave anything on the scale.
Cleaning
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Caution: Disconnect the scale from the AC adapter power source prior to cleaning the
unit.
1. Clean all external surfaces with a clean damp cloth. Mild antimicrobial soap and water
solution may be used. Dry with a clean soft cloth.
2. Do not immerse the scale into cleaning or other liquid solutions.
3. Do not use Isopropyl Alcohol or other solutions to clean the display surface.
4. Do not use abrasive cleaners.
Replacement Parts
Parts may be available if a piece of the scale needs to be replaced. Contact Health o meter
Professional Scales Customer Service at 1-800-815-6615 to inquire about the availability of these
replacement parts.
Part #
500HEADPIECE
500KLKEYPAD
500KLROD
500KLWHEELS
500KLFOOT
500KLMAT
BATTDOOR500
500KLPILLARFOOT
ADPT31
500REDINDICATOR
500HRTAB
500PILLARTAB
Description
Headpiece for height rod
Keypad overlay
Height rod
Set of 2 wheels
Foot for base
Replacement mat for platform
Battery compartment door
Foot for pillar
Power adapter
Red indicator tab at height rod base
Connector tab for height rod
Connector tab for pillar
19