Care & Maintenance - Cata VALTO Instrucciones Para La Instalación, El Uso, El Mantenimiento

EN
Warning: always switch off the electricity supply before carrying out maintenance work on
the hood. In the event of a fault, contact an official distributor or authorised dealer.
Cleaning the outside: use liquid, non-corrosive detergent and avoid using abrasive cleaning
products and solvents.Do not use high-pressure or steam cleaning devices.
Important: increase the filter cleaning/replacement frequency if the hood is used for more
than 2 hours a day. Always use genuine filters from the manufacturer.
Carbon filter replacement
Activated charcoal filters: replace them every 3 months.
Aluminium grease filter cleaning
To avoid fires, clean thoroughly once a month or whenever the display pilot light indicates as
such. To do so, remove the filters and wash with hot water and detergent. If using a dishwasher
(metal parts may turn black without this affecting their functional capacity), load the filters
vertically to avoid solid residue from being deposited.
Lamp replacement
The LED lamps in this appliance are not replaceable by the consumer. If a lamp fails, please
contact the customer helpline at the end of Care & maintenance to arrange an engineer visit.
CARE & MAINTENANCE