Cleaning - Wega MININOVA CLASSIC DUO 1GR Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 77
12

Cleaning

For perfect cleaning and efficiency of the appliance, several simple cleaning operations are necessary
on the functional parts and accessories as well as the body panels. The indications given here are appli-
cable for normal use of the coffee machine. If the machine is used continuously, then cleaning should be
performed more frequently.
Before cleaning the machine, turn it off the machine and let it cool off.
Cleaning
FILTERS and FILTER HOLDERS
Clean the filter holders daily by leaving them immersed in hot water all night so as
to allow greasy coffee deposits to dissolve; afterwards, rinse off everything with cold
water.
Perform the same cleaning weekly for 10 minutes in hot water and the appropriate
cleaner.
Failure to clean the filter holders daily will jeopardize the quality of the coffee and
the proper functioning of the filter holder.
Warning: only immerse the cup of the filter holder.
Avoid immersing the handle in water.
BODY
Cleaning of panels with a cloth moistened with lukewarm water. Remove the tray and Cup holder Grill and wash all
with hot water.
Avoid the use of abrasive cleaners that may scratch the surface of the bodywork. During cleaning pay attention to
edges and protruding parts.
STEAM NOZZLE
Clean the steam nozzles making a quick delivery till empty after each use and clean with a cloth dampened with warm
water.
DISPENSING UNIT
Wash the units as indicated:
use the solid portafilter;
pour the special detergent (see spare parts) into the solid filter and attach the filter holder;
Carry out a series of dispensings until the water comes out clean;
remove the portafilter from the unit and carry out at least one dispensing so as to eliminate the detergent residue.
PERFORATED DISK
Remove it by levering the seal (1) with a screwdriver, being careful not to damage it.
Clean the perforated disk (2) with hot water.
STEAM NOZZLE
Check and clean the terminals of the steam nozzles, using a small needle to reopen the exit holes.
Clean the inside of the nozzle at least once a week:
the nozzle as a result the cooling effect;
36
2
1
Daily Weekly
X
X
X
X
X
X
User manual

Publicidad

Tabla de contenido
loading

Tabla de contenido